Manitowoc Ice - K00364

Below are all the different types of Manitowoc Ice. Select the device of your choice, to download the manual

Contents

K00364 Electronic Bin Thermostat Installation Instructions ManitowiK This kit reduces overfill and condensation issues and can be used on any Manitowoc ice machine installed on an ice dispenser Order kit number K00336 for the following models IB0620 IB0820 IB 1020 QF0400 and QF2300 Control Settings Flake Nugget Chiplet The control must be reset from the factory setting Refer to the jumper and control settings Ice Cube Machines The machines use the factory control settings The controller has a one minute time delay anytime power is interrupted and restored Positioning the Touchpad Junipers P4 Jumper The P4 jumper labeled Jump 1 is used to set the control for heating or cooling mode Jump 2 is used to establish set point at either cut in or c ...